
Prof. Alexander Shmatov
Wuhan Textile University, China / Belarusian Institute of Construction Industry, Belarus
Title: PRACTICAL REALIZATION OF THE EFFECT OF HYDROCHEMICAL DISPERSION OF CERAMIC-FORMING MATERIALS
Abstract:
At the first stage of the work, the scientific foundations of a new hydrochemical technology for dispersing solid сeramic-forming materials were studied. As a result, the scientific principles of the hydrochemical dispersion of inorganic non-metallic powder materials have been formulated. The effect of hydrochemical nanodispersion of quartz and chalk microparticles has been established under conditions of the wedging destructive action of surfactants and the "pseudo-cavitation" thermodynamic-hydrodynamic shock-pulse impact of a boiling suspension with rapidly alternating thermal, chemical, and physical gradients created in a coarsely dispersed system. A geometric model of this process has been developed. As a result of hydrochemical dispersion, the suspension gradually converts into a ceramic-forming hydrosol. A generalized equation is proposed that describes the influence of various technological parameters on the degree of hydrochemical dispersion of ceramic-forming particles. Based on a study of the effect of hydrochemical treatment on changes in the size and volume fraction of dispersed quartz and chalk particles in an aqueous dispersion medium, it has been established that: (1) two opposing processes compete during hydrochemical treatment, namely, nanodispersion and aggregation of nanoparticles; (2) during prolonged hydrochemical treatment, the resulting aggregates in the aqueous dispersion medium are broken down into nano-objects, increasing the proportion of nanoparticles in the dispersed system.
The second stage of the work is devoted to the practical application of сeramic-forming hydrosols for strengthening tools. As a result, a simple and effective technology of thermohydrochemical treatment (THCT) was developed to increase the service life of steel, hard-alloy, and diamond tools. A new method of THCT of tools involves two stages: (1) hydrochemical treatment (HCT) of the tool surface in a boiling ceramic-forming hydrosol to deposit solid lubricant coatings, and (2) heat treatment (HT). The kinetics and mechanisms of structure formation in coatings produced by the THCT method were studied. A model diagram of the step-by-step formation of coatings during HCT of the tools is proposed. It has been established that during HCT of steel, coatings with a nanocrystalline structure are formed, and when heated above 500 °C, coatings with a nanocomposite structure are formed. A comparative analysis and optimization of the tribological properties of THC and HC coatings on steel and hard-alloy using hydrosols of various oxide, carbon and raw materials were conducted. Tribological tests showed that THCT of steel using optimal multi-oxide hydrosol significantly reduces the friction coefficient by a factor of 8.1 while HCT using a red clay and quartz hydrosols reduces it by a factor of 5.4–7.5, compared to uncoated steel. It was noted that coatings deposited by HCT using the optimal multi-oxide hydrosol retain a low friction coefficient even after heating up to 1050°C. Examples of practical application of THCT technology for the surface strengthening of metalworking tools made from various materials are presented. The new technology was tested at 44 enterprises in Belarus, Russia, Germany, Poland, the Czech Republic, and Slovakia. Industrial and laboratory tests showed that after THCT, the service life of steel cutting and stamping tools increases by a factor of 1.3–8, that of hard-alloy tools by a factor of 1.5–4.5, and that of diamond tools by a factor of 1.6–3.5 compared to traditional tools. The main advantages of the new THCT method over known processes have been established.
Biography:
Since 2021, Shmatov Alexander have received the degree of D.Sc. in Materials Science and Mechanical Engineering, as well as the title of Academician and Professor of the Russian Academy of Natural Sciences. Now Shmatov Alexander, D.Sc. works in two organizations: as a professor at Wuhan Textile University and as a chief researcher at the Belarusian Institute of Construction Industry.
Research Interest: The main directions of scientific activity of Prof. Shmatov Alexander are the development of scientific foundations and principles of strengthening materials, and on their basis the creation of efficient, economical and ecologically clean methods for strengthening machine parts and tools made from steels, hard alloys and diamond materials in the areas of heat treatment, thermochemical treatment and nanotechnology. Prof. Shmatov Alexander is interested in physical, mathematical and graphical modeling of strengthening materials processes, as well as optimization of technological processes for strengthening products and tools.